Weatherproof Farm - Training & Farm Walk - Grazed/Mixed Operations

Infiltration Rate Test – How To

Materials

  • Infiltration ring:
    • 304 bright polished stainless tube 5mm OD – 76.2mm diameter
    • Metals4U – link here – use Custom Cutting service
    • Length: 127mm
    • Mark depth at 3″ (75mm)
  • Driving block – 2×3 wood length cut to 10-12″ (250-300mm)
  • Club hammer – 1kg (Amazon etc)
  • Multi-stopwatch/timer app – Android, iOS
  • Measuring bottle (eg Meal Deal smoothie bottle) – marked at 107ml
  • Water bottle (to carry into field) – 5/11 or more

Process

  1. Select location(s) in field
    1. ~20-30m from boundary (hedge, fence etc)
    2. Avoid trafficked areas
  2. Drive ring into soil, to depth – marked on ring or 3″ (75mm)
    1. Use club hammer and wooden driving block
  3. Fill to mark on measuring bottle
  4. Pour water from measuring bottle into infiltration ring
  5. Start stopwatch immediately
  6. Time water infiltration – until soil just glistening at surface
  7. Repeat process in field and at/over boundary
    1. right up against hedge/boundary, or
    2. over the fence/wall (verge etc), or
    3. other area “out of management”
  8. Record your results
    1. compare in-field with your control (hedge, verge etc)
  9. Remove contents (clearing the ring):
    1. Place hammer head-first on ground
    2. Push ring down onto hammer handle (use full bodyweight)

Optional extras

  • How representative is your test?
    • Dig-up infiltration ring (with contents intact) – use spade
    • Prize open soil core
      • Compare interior to edges:
      • if moisture only seen at edges – then result is under estimate

 

Sign up and keep up-to-date

Newsletters and occasional mail-outs of upcoming events, based on your interests.

Latest Tweet

Niels Corfield